0006370: Leaning forward and moving head into obstacle will un-lean camera position but not player

ID	Project	Category	View Status	Date Submitted	Last Update

0006370	The Dark Mod	Coding	public	29.12.2023 16:40	09.01.2024 00:00

Reporter	Fiver	Assigned To	Daft Mugi
Priority	low	Severity	normal	Reproducibility	always
Status	closed	Resolution	no change required
Platform	Linux	OS	Debian	OS Version	11 Bullseye

Summary	0006370: Leaning forward and moving head into obstacle will un-lean camera position but not player
Description	Leaning forward and moving head into obstacle will un-lean camera position but not player. Player will then stay in this semi-leaning state until manually unleaning. Possible solutions: * If the players head stops them from strifing left/right, then stop player from moving further in that direction, but do not change state of neither camera position nor player state. * Unlean player completely (both camera position and player state) if their head hits something when leaning forward. TDM 2.12/64 #10518
Steps To Reproduce	In Training Mission below elevator engine (near 901.35 -1592.4 546.75) * Look out one of the windows and lean forward * Strife left or right into the wall * The camera (only) will jerk back (rather than stopping player from moving further in that direction) * Player is still in forward leaning state, so when manually de-leaning the final camera movement is small
Tags	leaning

Date Modified	Username	Field	Change
29.12.2023 16:40	Fiver	New Issue
29.12.2023 16:41	Fiver	Tag Attached: leaning
29.12.2023 17:21	Fiver	Description Updated
29.12.2023 23:27	Fiver	Steps to Reproduce Updated
30.12.2023 08:33	Fiver	Description Updated
08.01.2024 00:22	Daft Mugi	Note Added: 0016344
08.01.2024 00:22	Daft Mugi	Assigned To	=> Daft Mugi
08.01.2024 00:22	Daft Mugi	Status	new => closed
08.01.2024 00:22	Daft Mugi	Resolution	open => no change required
09.01.2024 00:00	Fiver	Relationship added	related to 0006387

Daft Mugi 08.01.2024 00:22 developer ~0016344	The 2.12 behavior is correct. The camera is supposed to only adjust the minimal amount needed as to not clip into a wall by design.